Fabrication benefits
- Efficient fabrication of the fixing cleat with special mounting tool
- Isolator system with pre-filler function: accelerated fabrication
- High level of efficiency: use of all components of the basic add-on construction for the Schüco AOC façade system, excluding fixing cleat and pre-filler
- High security thanks to a tested system (approval pending)
Technical information
Uf value of frame (≥)0.74 W/(m²·K)
Min. face width50 mm
Max. glass/panel thickness64 mm
Max. weight280 kg
Surface finishesPowder, Anodised, Paint
Air permeabilityAE 900
WatertightnessRE 1200
Impact resistanceI5/E5
Max. unit weight280 kg
Min.-max. face width50 mm
Face width, outside50 mm
Face width, inside50 mm
Face width of mullion50 mm
Face width of frame50 mm
Face width of transom50 mm
Min. glass/panel thickness32 mm
Min.-max. glass/panel thickness32…64 mm
Max. glass/infill weight280 kg
Butt joint width20 mm
Installation angle90°
Polygon façade angle20°
DrainageYes
Drainage levels3
Wind load resistance2.0/3.0 [kN/m²]
Spandrel safety barriersSurface-mounted, Façade-mounted
Passive house compliantYes
StandardsDIN EN 13830, General building authority approval
Building authority approvalYes
